Dell Networking S4810, Reference Manual

Page: 992 / 1761

Defaults multiplier = 3 ; level-1 (if not otherwise specified)
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Usage
Information
The holdtime (the product of the hello-multiplier multiplied by the hello-interval)
determines how long a neighbor waits for a hello packet before declaring the
neighbor is down so routes can be recalculated.
Related
Commands isis hello-interval — specifies the length of time between hello packets.
isis hello padding
Turn ON or OFF padding of hello PDUs from INTERFACE mode.
S4810
Syntax
isis hello padding
To return to the default, use the
no isis hello padding
command.
Defaults Padding of hello PDUs is enabled (ON).
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
992
Intermediate System to Intermediate System (IS-IS)