Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 88 / 564

HYDRAULIC AND PARK BRAKE SYSTEMS Park Brake System
Page 6-28 2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
6
8. Hold the plastic splash panel forward to access and release the tines securing the cable ferrule to the
frame bracket.
9. Remove the front park brake cable from the vehicle.
FRONT PARK BRAKE CABLE INSTALLATION
1. Position the front park brake cable to the vehicle.
2. Hold the plastic splash panel forward to access and route the cable end up to the lower-most park brake
bell crank and secure the cable ferrule to the frame bracket.
3. Reach under the driver side instrument panel and use a cotter pin to secure the front park brake cable
end to the lower-most park brake bell crank (Figure 6-25, Page 6-28) .
4. Secure the rear cable ferrule to the rear frame bracket nearest the park brake equalizer.
5. Insert the threaded adjustment rod through the equalizer bracket (Figure 6-24, Page 6-28) .
6. Install the conical nut with the cone oriented toward the equalizer and then install a jam nut onto the
threaded portion of the cable end. Advance both nuts a few turns.
7. Secure the spring from the end of the adjustment rod to the brake cable frame bracket.
8. Adjust the brake cable equalizer. See Park Brake Cable Adjustment on page 6-25.
9. Inspect all of the brake systems to ensure that both the hydraulic brake system and the park brake sys-
tem are adjusted and operating correctly before the vehicle is returned to service. See Brake System
Inspection on page 6-1.
PARK BRAKE EQUALIZER REMOVAL
1. Chock the wheels and release the park brake.
2. Remove the spring from the driver side equalizer adjustment rod (Figure 6-24, Page 6-28) .
3. Remove the nuts from the threaded adjustment rod on the cable end.
4. Remove the rear park brake cables from the equalizer and remove the equalizer.
PARK BRAKE EQUALIZER INSTALLATION
1. Secure the equalizer to the ends of the rear park brake cables (Figure 6-24, Page 6-28) .
Figure 6-24 Park Brake Equalizer Figure 6-25 Park Brake Cable Attachment