Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 537 / 564

HYDRAULIC ATTACHMENT SYSTEM Angle Frame Bushings
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 16-39
16
ANGLE FRAME BUSHINGS
SNOW BLADE ANGLE FRAME
Removal and Installation
ý
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
- Fluids are under pressure.
- Flying debris or loose material is present.
- Engine is running.
- Tools are being used.
1. Remove bushings (1) (Figure 16-77, Page 16-39) from both sides of angle frame.
2. Apply LOCTITE 271 (Red) to the bushings before installing them into the frame.
3. Install bushings (2) (Figure 16-78, Page 16-39) on both sides of the angle frame.
4. Remove the four bushings (1) (Figure 16-79, Page 16-40) from both ends of the angle frame.
5. Apply LOCTITE 271 (Red) to the bushings before installing them into the angle frame (Figure 16-80,
Page 16-40) .
6. Install the four bushings (2) on both ends of the angle frame.
Figure 16-77 Remove Snow Blade Angle Pivot
Bushings
Figure 16-78 Apply LOCTITE and Install Angle Pivot
Bushings
1
2