Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 387 / 564

KAWASAKI GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES Clutches
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 13a-35
13A
1. Place the driven clutch onto the Spring compression base (CCI P/N 102603501) (Figure 13a-31,
Page 13a-35) .
2. Place the Spring compression collar (CCI P/N 102605201) onto the driven clutch.
3. Thread the Spring compression nut (CCI P/N 102606101) down onto the threaded post enough to
release the pressure on the snap ring.
4. Use snap-ring pliers to remove the snap ring (1) (Figure 13a-32, Page 13a-36) .
5. Slowly remove the spring compression nut. The collar will then rise and release tension on the spring (3).
6. Remove the cup (2) and spring (3).
7. Remove the moveable sheave (4) from the fixed sheave (5). See following NOTE.
NOTE: Both the moveable and fixed sheaves have spacers (6). Be sure to retain the spacers for reassem-
bly of the driven clutch.
Figure 13a-31 Driven Clutch Service Tools
SPRING COMPRESSION
NUT (CCI P/N 102606101)
DRIVEN
CLUTCH
SPRING COMPRESSION
BASE (CCI P/N 102603501)
SPRING COMPRESSION
COLLAR
(CCI P/N 102605201)