Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 55 / 564

2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 5-1
5
SECTION 5 – ACCELERATOR AND BRAKE
PEDAL ASSEMBLIES
ý
DANGER
• See General Warning, Section 1, Page 1-1.
ý
WARNING
• See General Warning, Section 1, Page 1-1.
ACCELERATOR PEDAL
See General Warning, Section 1, Page 1-1.
ACCELERATOR PEDAL REMOVAL
1. Turn the key switch OFF, and place the Forward/Reverse handle in the NEUTRAL position. Remove the
key. Chock the rear wheels.
2. Disconnect the battery cables as instructed. See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-1.
3. Disconnect the cable strain relief from the pedal bracket.
4. Disconnect the Z-shaped end (1) of the accelerator cable from the pedal (Figure 5-1, Page 5-1).
5. Remove the pedal assembly bolts and locknuts that secure the pedal assembly to the frame.
6. Slide out and twist the pedal to remove the pedal assembly from the frame.
7. Inspect the pedal bushings for wear and replace pedal assembly if worn.
8. Inspect the pedal and return spring hub bushings for excessive side-to-side movement. Replace the
pedal assembly if either or both show signs of excessive wear.
Figure 5-1 Z-Shaped Cable End – Gasoline Vehicles
1