Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 301 / 564

ELECTRICAL COMPONENTS: KAWASAKI POWERED GASOLINE VEHICLES Reverse Warning Buzzer (If Equipped)
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 12a-11
12A
2. Install the electrical component cover.
3. Connect the battery cables, positive (+) cable first, and tighten the terminals to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
REVERSE WARNING BUZZER (IF EQUIPPED)
See General Warning, Section 1, Page 1-1.
Testing the Reverse Warning Buzzer
See Test Procedure 20, Section 11a, Page 11a-30.
Reverse Warning Buzzer Removal
1. Turn the key switch OFF and remove the key. Place the Forward/Reverse handle in NEUTRAL. Chock
the wheels.
2. Disconnect the battery cables as instructed. See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-2.
3. Raise the hood.
4. Remove the plastic rivets securing the reverse warning buzzer and remove the reverse warning buzzer
(Figure 12a-7, Page 12a-11) .
Reverse Warning Buzzer Installation
1. Install the reverse warning buzzer and secure it with two plastic rivets.
2. Connect the black wire from the wire harness to the negative (–) terminal on the buzzer.
3. Connect the red/white wire from the wire harness to the positive (+) terminal on the buzzer.
4. Lower and secure the hood.
5. Connect the battery cables, positive (+) cable first, and tighten the terminals to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
Figure 12a-7 Reverse Warning Buzzer and Limit
Switch