Club Car IntelliTach XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 183 / 564

TROUBLESHOOTING AND ELECTRICAL SYSTEM: KAWASAKI POWERED GASOLINE VEHICLES Test Procedures
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 11a-29
11A
TEST PROCEDURE 19 – REVERSE WARNING BUZZER LIMIT SWITCH (IF
EQUIPPED)
See General Warning, Section 1, Page 1-1.
NOTE: Keep the battery connected during this test procedure.
The reverse warning buzzer limit switch is located on the Forward/Reverse handle under the hood.
1. Turn the key switch OFF and remove the key. Place the Forward/Reverse handle in NEUTRAL. Chock
the wheels.
2. Check for proper wiring and tight connections at the reverse warning buzzer and the reverse warning
buzzer limit switch (Figure 11a-26, Page 11a-29) .
3. Move the Forward/Reverse handle to REVERSE and listen for an audible click from the limit switch. If
there is no click, check the switch for proper alignment and switch arm movement.
Figure 11a-25 Key Switch Test – Engine Kill Circuit
Figure 11a-26 Reverse Warning Buzzer and Limit
Switch
Reading with key switch
in the OFF position
2m
20
m
200
m
2k
200
200
200 200
20
2
200
m
500
20k
200k
2000
k
1000
OFF
WAVETEK 5XL
V
V
V
A
! ! COM 200nA
MAX
1000 ---
750V
FUSED
M B
L
G
S