CONFOCOR
3
ConfoCor 3
Action Buttons
Carl Zeiss
02/2010 M60-1-0025
e
105
•
Select
Normalize
to display the correlation
curves in a normalized form (Fig. 108). The
amplitude of the diffusion contribution will be
normalized to 2, not the total amplitude, if
other term like triplet state were used in their
normalized form. This option is only available
for the
Fit Correlation
diagram.
•
Select
Show fit range text
to display the start
and end values of the fitted data of the
correlation curve defined by the red and blue
bars. The positions of the bars can be adjusted
by drag and drop. This option and the bars are
only available for the
Fit Correlation
diagram.
Start Channel
and
End Channel
determine
which part of the correlation curve should be
fitted to the model. The start and end position
of the channels will be displayed as correlation
times (in
µ
sec) and not in absolute channel
numbers, since those will change dependent on
the
Correlator
settings defined in the
Measure’s
tool in
Processing
panel.
The zoom function can be used to display certain
areas of interest in the
Fit deviation
diagram.
•
Use the left mouse button to click on the
margin of the area of interest in the
Fit
deviation
diagram, keep the mouse button
pressed and draw a rectangular above the area
of interest in any required direction. On release
of the mouse button, the selected area is
displayed in the diagram in an enlarged form.
The scaling of axes is matched automatically.
The context menu of the
Fit deviation
diagram
can be used to reset the zoom to its original value,
copy the data, and adjust the display.
•
Click on the diagram with the
right
mouse
button. The
Fit deviation
context menu is
opened.
•
Click on the line
Reset Diagram Zoom
with
the left mouse button to reset the zoom to its
original value.
•
Select the line
Scaling
to open the
Diagram
scaling window. Enter the required percentage
value (from 1 to 100) for the scaling and click
on
OK
to rescale,
Cancel
to keep the old value.
The scaling of the G(t) axis will be adjusted.
Fig. 108
Fit Correlation Curve (standard
display), with fit curve only, in
normalized form
