NOTES ON DEVICE SAFETY
LSM 710 and LSM 780
Carl Zeiss
User Interface
Systems
30 M60-1-0025
e
02/2010
1.11.2
Mounting and Dismounting the LSM
BiG
Do not remove the laser safety cable (Fig. 22/
1
) from the LSM 710 / LSM 780 system. This might
result in failure of laser safety and a non operating system.
•
Loosen the two fastening screws (Fig. 22/
3
) of the LSM
BiG
port (Fig. 22/
2
).
•
Slowly pull the LSM
BiG
(Fig. 22/
4
) away from the port.
•
For mounting the LSM
BiG
onto the port, make sure the pins and the electronic connections of the
safety interface match closely.
•
Push the LSM
BiG
to the port and fasten the two fastening screws.
If the LSM
BiG
is not attached, the laser safety cover must be mounted on the LSM
BiG
port to close the
laser safety loop:
•
Push the laser safety cover (Fig. 23/
3
) to the port (Fig. 23/
1
) and fasten the two fastening screws
(Fig. 23/
2
).
Fig. 22
Port connection between LSM 710 /
LSM 780 and LSM
BiG
Fig. 23
Laser safety cover for LSM
BiG
port
