CENTER SCREEN AREA / IMAGE CONTAINERS - …
LSM 710 and LSM 780
Carl Zeiss
3D View (Image VisArtplus)
Systems
190 M60-1-0025
e
02/2010
6.8.9
Series
The
Series
tab (Fig. 217) displays the
Render
Series
control panel. This panel allows settings for
the axis to be used for rotation of the 3D
reconstructed images. This feature is applicable to
all render modes available in VisArt
plus
.
There are four different modes for producing
render series (see Fig. 219).
Depending on the activated mode, directly set the
parameters for animation in the
Render Series
window and the position of the 3D image in the
Image Display
window (zoom, rotation axes,
rendering parameters).
Click on
Apply
to start the animation
The animation is performed in a separate
Image
Display
window, which permits the animation to
be saved afterwards.
(1)
Turn around X and Turn around Y mode
In this mode, the image is turned around the X-axis or the Y-axis exclusively.
The values for
Number of Views
,
Difference Angle
and
First Angle
can be selected accordingly).
(2)
Start and End mode
In the
Start and End
mode, the image is recon-
structed between a start position and an end
position.
The rotation angles for X, Y and Z and the distance
(zoom) can be determined using the sliders.
The value for
Total frames
can be varied. The
frames are distributed equally between the start
and end points (Fig. 220).
Fig. 217
Series tab
Fig. 218
Render Series window
(e.g. Turn around X mode)
Fig. 219
Render Series modes
Fig. 220
Start panel in the Render View control
block
