LSM 710 and LSM 780
INTRODUCTION
Systems
Carl Zeiss
02/2010 M60-1-0025
e
III
How to make best use of the LSM 710, LSM 780, LSM 710 NLO and LSM 780 NLO
operating instructions:
This operating manual also includes the instructions for the ConfoCor 3 systems.
A few symbols in these operating instructions will help you to recognize the nature and purpose of
information immediately:
The WARNING symbol warns against hazards for the user that might arise when operating the
laser.
This WARNING symbol warns against hazards from dangerously high voltages.
The CAUTION symbol warns against faults and hazards that might arise during operation and
which might cause damage to the unit.
The NOTE symbol will help you to optimally solve your work problem. It represents a practical
tip which will help you to find out which settings and methods are capable of improving or
accelerating a procedure.
The HOT SURFACE symbol warns against hazards for the user that might arise when touching
the lamp housing during operation.
The MAINS PLUG symbol remembers service personal to pull the mains plug before opening the
device housing.
Depending on the request, these operating instructions will supply you with various possibilities:
•
If you want to know where to find certain general areas of information, refer to the following outline
of sections to get a general overview.
•
You will find a detailed table of contents at the start of every chapter. There you will see at a glance
what topics are covered in detail.
Always remember:
The time you invest in getting acquainted with the product will pay
for itself many times over in your application task.
