LSM 710 and LSM 780
CENTER SCREEN AREA / IMAGE CONTAINERS - …
Systems
Mean of ROI: Additional View Type for Time Series
Carl Zeiss
02/2010 M60-1-0025
e
225
Buttons for diagram display options:
Mode
pull down: choose between area and mean mode
Area:
Display of the area of the ROI in the intensity time diagram,
depending on the set threshold values. Area measurements of very
small areas (< 10 pixels) give only approximate values.
Mean:
Display of the mean values of the relevant ROI in the intensity
time diagram.
Diagram line width
pull down: sets the line with of the curves in the
diagram.
Diagram graph style
pull down
:
choose from a set of graph styles
Show Table
tick box: The table of intensity values is displayed on the
bottom of the Image Display window.
Time unit
pull down: choose between seconds, minutes, hours or
Automatic
Time Range
check box and spin box: reduce the displayed time range
to the selected value
In Area Mode: Ch1 / Ch3 / Ch4
pull down: Selection of the channel to
be used.
In Area Mode: Threshold low and high
slider: The intensity values
below /above threshold are not displayed for the
Area
function.
