LSM 710 and LSM 780
CENTER SCREEN AREA / IMAGE CONTAINERS - …
Systems
Profile View
Carl Zeiss
02/2010 M60-1-0025
e
205
Control block tools
The
Profile
toolbar contains the following tools:
Select
button: Activates the mouse button for selection, resizing or movement of the
profile line in the
Image Display
window.
Resize: Click on handle and hold down the mouse button, move the handle, release
mouse button.
Movement: Click on line and hold down the mouse button, move the entire line, release
mouse button.
Line with arrow
button: (open arrow): Activates the straight profile drawing mode.
Click into the image and hold the mouse button, drag a line in any direction and release
the mouse button to end the procedure.
Open polyline arrow
button: Activates the open polyline drawing mode.
The first click into the image sets the starting point, each additional click adds a further
line, right mouse click ends the procedure.
Line
button: This button allows you to determine the line thickness of the profile line. It
has no influence on the way the intensity profile is generated.
Show Table
button: The profile diagram is displayed as a table at the bottom of the
Image Display
window.
Tables can always be saved or copied to the clipboard by right-mouse clicking on the table
display!
