LSM 710 and LSM 780
LEFT TOOL AREA AND HARDWARE CONTROL TOOLS
Systems
Acquisition Tab
Carl Zeiss
02/2010 M60-1-0025
e
53
To stop an Experiment:
a)
The action buttons turn into stop buttons and can be used to stop the system.
b)
When performing a multidimensional experiment, the graphical representation of the experiment
type (see above) turns into a stop button. Using this button will immediately stop the acquisition.
Using the finish current step button will interrupt the multidimensional acquisition after the
currently performed step. (i.e. when performing Z over time it will finish the current Z-Stack and
then stop the experiment.)
5.2.2
Smart Setup
The tool
Smart Setup
, is an intuitive, user-friendly
interface which can be used for almost all standard
applications. It configures all the system hardware
for a chosen set of dyes.
Configure your experiment
(Fig. 41/
1
):
•
Simply choose the dye(s) used from the list dialog, and assign signal display color(s), see also Fig. 40.
Fig. 40
Configure your experiment
Fig. 39
Smart setup button
