LSM 710 and LSM 780
CENTER SCREEN AREA / IMAGE CONTAINERS - …
Systems
3D View (Image VisArtplus)
Carl Zeiss
02/2010 M60-1-0025
e
191
(3)
Position List mode
In the
Position List
mode, the image is
reconstructed between any required number of
interim positions to be determined individually. Just
rotate the reconstructed image with the mouse or
do any other adjustment and add this as a
"position" in the position list. The module will
create a movie using those positions as a guideline.
It will interpolate all the parameters ticked in the
list.
The rotation angles for X, Y and Z and the zoom
can be determined directly in the image.
Every required interim position is included in the
list of the
Render Series
window with a click on
the
Add
button.
Remove
permits the contents of the list to be deleted.
Insert
inserts a position above the highlighted list
entry.
The value for
Total frames
can be varied. A value of 20 produces a render series with 20 frames in total.
Interpolate
lists variables that are interpolated during the Render Series.
Pressing the
button creates a short and low resolution (no interpolation!) preview of the
rendering using the positions currently in the list. This serves as a help to quickly review the rendering
without actually starting the process (which might be time consuming in cases of long position lists.
Click on the
Apply
button calculates a spline along all the defined positions from the list and starts an
animation along this spline track in space.
Fig. 221
Render Series window -
Position List mode
