LSM 710 and LSM 780
LEFT TOOL AREA AND HARDWARE CONTROL TOOLS
Systems
Acquisition Tab
Carl Zeiss
02/2010 M60-1-0025
e
79
5.2.7
Tool Group Online Acquisition:
Channels Tool
The
Channels
tool provides the control of the
parameters of the individual detection channels.
It also allows to activate and de-activate tracks by
ticking and un-ticking the track check box
.
The channels and tracks defined in the
Imaging
Setup, Light Path
tool or by
Smart Setup
are
listed channel by channel as selectable list entries.
Clicking on the list entry
Track
displays controls (laser, pinhole, gain, …) for all the
channels in the respective track.
Clicking on the
Channels
list entry displays
the controls for the selected channel only.
Using shift-clicks – the controls can be displayed
for any given combination of channels or tracks.
If entered in Smart Setup, the Imaging Setup tool
or the Light Path tool the names of the dyes used
or the names of the tracks are displayed in the
Channel Tool.
Depending on the selected
Channel
or
Track
, the currently used settings of Pinhole, Gain (Master),
Digital Offset, Digital Gain, laser line and laser power are displayed. Below, all available options with
Show all
active are described.
Fig. 71
Channels tool using channel mode (in
this case multiple tracks) for imaging
