02/2010
11
•
Use the focusing drive of the microscope to focus the object plane.
•
Select specimen detail by moving the stage in X and Y using the XY stage fine motion control.
Setting the microscope for reflected light
•
Click on the
Reflected Light
icon to open the
X-Cite 120 Controls and turn it on.
•
Click on the
Reflected Light
shutter to open
the shutter of the X-Cite 120 lamp / HBO100.
•
Click on the
Reflector
button and select the
desired filter set by clicking on it.
Storing the microscope settings
Microscope settings can be stored as
configurations (Fig. 13) by typing a config name in
the pull-down selector and pressing the save
button. Fast restoration of a saved config is
achieved by selecting the config from the pull-
down list and pressing the
load button. The
current config can be deleted by pressing the
delete
button.
These configurations can be assigned to buttons
that are easier to press.
Depending on the microscope configuration,
settings must be done manually if necessary.
Fig. 12
Microscope Control window with
Transmitted Light pop-up menu
Fig. 13
Configuration panel
