LSM 710 and LSM 780
LEFT TOOL AREA AND HARDWARE CONTROL TOOLS
Systems Maintain
Tab
Carl
Zeiss
02/2010 M60-1-0025
e
141
5.4
Maintain Tab
The
Maintain
tool group on the
Maintain
tab provides functions to adjust hardware components of the
system.
5.4.1
Adjust Pinhole and Collimator
This function permits pinholes and collimators to be
optimally aligned and adjusted to the used beam
path. The function can be called up in the
Maintain
panel in the
Adjust Pinhole and Collimator
tool
of the
Maintain
tool group (see Fig. 153).
The position of the pinhole (X-Y-Z-coordinates) in
relation to the detector makes a major contribution
to image optimization.
In all existing standard configurations, the pinholes
have already been adjusted at the factory. These
settings are taken over for active operation when a
standard configuration is loaded.
If you want to create a setting that differs from the
standard configurations, adjust the pinhole as
follows.
Fig. 153
Adjust Pinhole and Collimator tool
