Messages
370
RIVAGE PM10 Operation Manual
Console Network: ring connection open!
Check cable connection.
The system detected that the ring connection of the console
network is disconnected. Check the cable integrity and
connection.
Cooling fan error! (XXX) Contact Yamaha
service
The system detected faulty cooling fans on the console. Please
contact your Yamaha dealer.
Couldn’t access the file
The specified directory or file does not exist.
Couldn’t delete file
The system failed to delete the file.
Couldn’t rename file
The system failed to rename the file.
Couldn’t write file!
The system tried to save the file, but failed to write it to the USB
storage device.
CUE turned off (Keyin)
The Keyin’s CUE was automatically turned off.
CUE turned off (Plug-in)
The plug-in’s CUE was automatically turned off.
CUE turned off (USB playback out)
The CUE of the USB recorder output was automatically turned
off.
CUE turned off (USB recorder in)
The CUE of the USB recorder input was automatically turned off.
CUE turned off (USB recorder in/out)
The CUE of the USB recorder input/output was automatically
turned off.
DCA ROLL-OUT : DCA members scrolling.
DCA members’ fader assignment is scrolling in DCA ROLL-OUT
mode.
Directory not empty!
The directory in the USB storage device cannot be deleted
because the directory is not empty.
Editor initialization [XX] completed
The Editor initialization is complete.
Fader bank snapshot is done.
Fader bank snapshot has been taken.
File access busy!
The system did not complete the operation because it is currently
processing internal data. Try it again later.
File already exists!
A file with the same name as the one you are about to save
already exists.
Finished loading file
File loading is complete.
Finished saving file
The file save operation is complete.
GPI 5V output error! Disconnect GPI and
check connection.
The system detected an abnormality at the GPI +5V output
connector. Excessive current may exist due to a short-circuit to
ground. Check the cable connection.
Home bookmarked
The status of the control panel and screens are bookmarked via
the HOME key.
Image file for Console Lock screen
successfully loaded.
The image file for the Console Lock screen was loaded
successfully.
Image file too large!
The system failed to load the image file for the Console Lock
screen because the size is too large (exceeds 3072 x 768 pixels).
Message
Meaning
Inappropriate scene number (#XX)
An inappropriate scene number was assigned during the scene
renumbering operation.
Internal error! (BUFFER_FULL)
An internal error occurred on the console. If this error persists,
please contact your Yamaha dealer.
Internal error!
(PANELxx_COMMUNICATION_ERR)
An internal error occurred in the console. Communications inside
the operation panel may be faulty. Please contact your Yamaha
dealer.
Internal error!
(PANELxx_DISCONNECTED)
An internal error occurred in the console. Connections inside the
operating panel may be faulty. Please contact your Yamaha
dealer.
Internal memory corrupt! Try initializing
console and restart.
Internal memory is corrupt. Initialize the console, and then restart
it.
Internal memory corrupt! Try initializing
editor and restart.
Internal memory is corrupt. Initialize the console, and then restart
it.
Loading aborted
File loading was interrupted.
Low Battery! (DSP Engine)
The internal battery capacity of the DSP engine is low. The
internal clock may not keep the correct time. Please contact your
Yamaha dealer for information regarding battery replacement.
Max. HY slot channel count exceeded!
(256)
The number of output channels in the DSP engine assigned to
TWINLANe exceeds the maximum number (256) of channels
allowed. Limit the number to 256 or less.
Max. TWINLANe channel count exceeded!
(400)
The number of output channels in the entire system assigned to
TWINLANe exceeds the maximum number (400) of channels
allowed. Limit the number to 400 or less.
MIDI: Data framing error!
MIDI data Rx framing error occurred.
MIDI: Data overrun error!
MIDI data Rx overrun error occurred.
MIDI: Rx buffer full!
MIDI Rx buffer is full.
MIDI: Tx buffer full!
MIDI Tx buffer is full.
Mixing data corrupt on Control Surface!
To recover:-
- Go to DEVICE SYNC screen and re-sync
data (DSP --> CS), OR
- Go to SAVE/LOAD screen and load a
complete settings file, OR
- Initialize this control surface
The internal data of the control surface is corrupt.
To recover the data, access the DEVICE SYNC screen, and then re-
sync data in the DSP
→
CS sync direction. Alternatively, access the
SAVE/LOAD screen and load the setting file. Otherwise, initialize
the control surface
Mixing data corrupt on DSP Engine!
To recover, go to DEVICE SYNC screen
and re-sync data (CS --> DSP).
The internal data of the DSP engine is corrupt.
To recover the data, access the DEVICE SYNC screen, and then re-
sync data in the CS
→
DSP sync direction.
Mixing data corrupt on Editor!
To recover:-
- Go to DEVICE SYNC screen and re-sync
data (DSP--> EDITOR), OR
- Go to SAVE/LOAD screen and load a
complete settings file, OR
- Initialize this editor
The internal data of Editor is corrupt.
To recover the data, access the DEVICE SYNC screen, and then re-
sync data in the DSP
→
EDITOR sync direction. Alternatively,
access the SAVE/LOAD screen and load the setting file.
Otherwise, initialize the control surface
Message
Meaning
