CH Parameter
DELAY
189
RIVAGE PM10 Operation Manual
6
Tabs
Use these tabs to select a channel that you want to view on the screen.
Press this button to reset all dynamics parameters to the initial values.
7
COPY button
Copies the delay parameter settings to buffer memory.
8
PASTE button
Press this button to paste the settings that were copied in buffer memory to the delay of the
currently-selected channel. If valid data has not been copied into buffer memory, you will be
unable to paste it.
DELAY popup window (CH 1-72, CH 73-144, MIX, MTRX/ST)
This window displays the corresponding input channels (or output channels) simultaneously. It is
useful when you want to quickly check the delay setting for multiple channels.
1
Channel select buttons
Enable you to select the channel that you want to operate. The current channel icon, number,
and color appear on the button.
2
DELAY ON indicator
Indicates the on/off status of the delay.
3
DELAY TIME button
You can view the delay value when the delay is turned on (always displayed in units of ms on
the upper row, and in the currently-selected scale on the bottom row). Press this button to
access the DELAY TIME popup window (
), in which you can set the delay time.
4
Tabs
Use these tabs to select a channel that you want to view on the screen.
4
1
2
3
