System Setup
BUS SETUP
129
RIVAGE PM10 Operation Manual
4
POST send point select buttons
You can select the send point for each channel. These buttons correspond to the following
parameters.
5
SEND TO [+]/[−] buttons
Enable you to select the MATRIX bus channel as the signal destination for a single channel at a
time.
6
SEND TO [<<]/[>>] buttons
Enable you to select the MATRIX bus channel as the signal destination for 12 channels at a
time.
4.
Use the send point select buttons to specify the send point.
Button
Send Point
POST FADER
Immediately after the fader
POST ON
Immediately after the [ON] key