Screen Overview
About the SELECTED CHANNEL VIEW screen
95
RIVAGE PM10 Operation Manual
■
DIGITAL GAIN field
1
Ф (Phase) button
Switches the phase of the head amp input signal
between normal phase (gray) and reverse phase
(orange).
2
DIGITAL GAIN knob
Indicates the digital gain value. Use the screen
encoder to adjust the digital gain. If the Gain
Compensation function is turned on, this knob
will adjust the level of the signal input to the
selected channel.
3
GANG button
Appears if channels are paired.
If this button is on, the differences in digital gain will be maintained, and the digital gain
GANG button will also be turned on.
■
DELAY field
1
DELAY ON buttons
Switches delay on or off for the selected channel.
2
Delay time
Each number indicates the delay time. Use the
corresponding screen encoder to adjust the delay
time. In addition, you can press one of these
values to display the DELAY TIME popup
window, in which you can set the delay time.
3
GANG button
Appears if channels are paired.
If this button is on, then differences in delay time
will be maintained.
■
DIRECT OUT field (input channels only)
This field enables you to turn Direct Out on/off for the selected input channel.
1
ON button
Turns the Direct Out on or off.
2
Direct Out patch popup button
Press this button to access the INSERT/D.OUT
(1CH) popup window (
). The Direct Out
level value will appear to the left of the button.
■
EQUALIZER field
1
EQ graph
This field indicates the approximate response of the EQ. Press this field to open the HPF/EQ
(1CH) popup window (
), in which you can set the HPF, LPF, and EQ.
2
Tabs (Output channels only)
Use these tabs to select a band that you want to view on the screen.
3
EQ IN/OUT level meters
Indicate the peak level of signals before and after the EQ. For a stereo channel, these meters
indicate the level of both the L and R channels.
4
EQ ON/OFF button
Switches the EQ on or off.
3
2
1
1
3
2
1
2
1
5
6
6
7
7
3
4
8
8
1
2
3
4
