CH Parameter
TO STEREO
200
RIVAGE PM10 Operation Manual
Each screen contains the following items.
TO STEREO popup window
1
Channel select button
Indicates the channel. Press the button to select the on-screen selected channel. The current
channel icon, number, and color appear on the button, and the channel name appears below
the button.
2
ST/LCR mode select button
Press this to switch the mode between ST and LCR. The currently-selected mode is displayed
with emphasis.
3
TO ST A button
Turns the signal sent to the STEREO A bus on/off.
4
TO ST B button
Turns the signal sent to the STEREO B bus on/off.
5
TO ST PAN/TO ST BALANCE knob
For a MONO channel, this knob functions as a PAN knob that adjusts the left/right position of
the signal sent to the STEREO bus. For a STEREO channel, this knob functions as a
BALANCE knob that adjusts the volume balance of the left/right signals sent to the STEREO
bus. To edit a value, press a knob to select it, and then use the corresponding screen encoder.
6
∑ clipping indicator
This indicator lights to indicate that a signal is clipping at some point in the channel.
NOTE
This is also shown for MATRIX channels that do not have a stereo send.
If the ST/LCR mode select button is set to LCR mode, the following button and knob will be
shown instead of the TO ST A button (
3
) and TO ST B button (
4
).
7
LCR button
Switches on/off all signals sent from the channel to the STEREO
bus. If this button is off, the corresponding channel will send no
signals to the STEREO bus.
8
CSR knob
Adjusts the ratio of the signal level sent from the channel to the
STEREO A (L/R) bus and the signal level sent to the STEREO B
(C) bus, in a range of 0–100%. To change the value, press the
knob to select it, and then use the corresponding screen encoder.
TO STEREO field in the
OVERVIEW screen
TO STEREO field in the
SELECTED CHANNEL VIEW screen
6
2
1
3
4
1
5
7
8
