Yamaha RIVAGE PM10 Operation Manual Download Page 372

Page: 372 / 375

Messages

372

RIVAGE PM10 Operation Manual

USB over-current error! Disconnect USB
device.

An excessive current was detected at the USB port. Remove the
USB device connected to the USB port, and check the port for
abnormalities.

USB recorder busy! Operation aborted

The two-track USB recorder is currently processing data. The
latest operation was aborted.

USB recorder: Cannot edit comment. No
ID3 tag in the file.

No ID3 tag exists in the file, and the system failed to edit the
comment.

USB recorder: Max. number of audio files
exceeded!

The maximum number of song files allowed has been exceeded.

USB recorder: Metadata edit failed

Metadata for the song file failed to be edited.

USB recorder: Metadata successfully
changed

Metadata for the song file was edited.

USB recorder: Playback stopped due to
slow memory access!

Playback was interrupted due to insufficient access speed to the
USB storage device.

USB recorder: Recording stopped due to
slow memory access!

Recording was interrupted due to insufficient access speed to the
USB storage device.

USB recorder: Recording stopped due to
wrong word clock!

Recording on the USB recorder was stopped due to an
inappropriate system word clock.

USB recorder: Storage full!

There is insufficient capacity in the USB storage device.

USB recorder: Storage mounted

The USB storage device is mounted.

USB recorder: Storage protected!

The USB storage device is protected.

USB recorder: This is the root folder for
song files

You cannot browse the hierarchy above the root directory for the
song files.

Wrong password!

You have entered an incorrect password to unlock the console.

Wrong word clock!

The system word clock is inappropriate. Supply an appropriate
word clock.

XX parameters set to default

XX parameters are reset to their default values.
(“XX” represents the type, such as “EQ,”or “Dynamics1.”)

Message

Meaning

Summary of Contents for RIVAGE PM10
























































































































































































































































































































































































Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands

Yamaha RIVAGE PM10, Operation Manual

Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands