CH Parameter
INSERT/D.OUT (Insert/Direct Out)
179
RIVAGE PM10 Operation Manual
INSERT/D.OUT (Insert/Direct Out)
About insert
Each channel provides two inserts: Insert 1 and Insert 2. In each insert, you can insert up to four
plug-ins, GEQ/PEQ, or external devices (via the I/O jacks). The insert point can be freely selected
independently for INSERT 1 and INSERT 2.
For details on inserting plug-ins, refer to “
” (
For details on inserting GEQ/PEQ, refer to “
Inserting a GEQ/PEQ into a channel
Inserting an external device (OUTBOARD) into a channel
An external device such as an effect processor can be inserted into the signal route of each channel.
There are three ways to control the external device.
• Controlling via the Selected Channel section
• Controlling via the OVERVIEW screen
• Controlling via the SELECTED CHANNEL VIEW screen
■
Controlling via the Selected Channel section
1.
Select the channel that you want to operate.
2.
Press the INSERT [PLUG–INS] key to access the INSERT screen.
1
INSERT 1/2 switch button
Switches between INSERT1 and INSERT2.
2
INSERT block [A]–[D] buttons
Indicate four plug-ins that have been assigned to INSERT1 and INSERT2 respectively.
Press this button to display the edit screen for the assigned plug-in.
3
MOUNT popup button
Press this button to display the Mount popup window.
3.
Use the INSERT 1/2 switch button and INSERT [A]–[D] buttons to select an insert
channel and block for which you want to assign the external device.
4.
Press the MOUNT popup button to access the MOUNT popup window.
1
INSERT [PLUG-INS] key
Enables you to recall a parameter setting
screen for the inserted plug-ins.
2
INSERT 1/2 [ON] keys
Switch the INSERT1 and INSERT2 on
or off respectively.
1
2
1
3
2
