Conceptual Diagram of Memory
49
RIVAGE PM10 Operation Manual
• Isolate function
This function protects an entire channel module from any type of memory recall; not only scene
memory but also libraries such as EQ or Dynamics. The Isolate function protects parameters of the
isolated channel from scene recall and library recall.
NOTE
• If you load the setting file, the parameters of the isolated channel will not be protected by the Isolate
function.
• The parameters of the isolated channel will not be protected from GEQ or plug-in library recall.
Example: Suppose that during the actual performance, you need to disconnect a certain input
channel from the mixing. In this case, you could disconnect that channel by turning on all
of its Recall Safe settings, but that channel is being used with partial Recall Safe for a
different purpose. In this case, the desired operation will not be obtained unless you
manually change the Recall Safe filter settings. However by using the Isolate function, you
can instantly disconnect that channel regardless of Recall Safe.
The Isolate on/off parameter is provided on each of the channels Input Ch 1 – 144, Mix 1 – 72,
Matrix 1 – 36, and Stereo A/B.
• Overlay and storing a scene
Overlay is a function that enables you to specify a temporary offset value for the fader or send levels
in the current mix.
Normally, these Overlay offset values are ignored when the scene is stored. However, you can also
store the resultant values to which the offset values have been added.
• Library function
Separately from scenes, various library functions allow data such as EQ settings and channel names
to be saved and recalled.
SCENE MEMORY
Current Data
MIX Data
CHANNEL
ISOLATE
Current
MIX Data
OVERLAY
FILTER
Actual Value
(DSP&UI)
RECALL SAFE
FILTER
RECALL
FOCUS
FILTER
Al
w
ays
associated
EQ, DY
N
AMICS, LIBRARY
DCA ASSIG
N
, MUTE
ASSIG
N
LIBRARY
I
N
PUT, MIX (ST), MATRIX,
N
AME LIBRARY
CH. LIBRARY
OVERLAY LIBRARY
