Yamaha RIVAGE PM10 Operation Manual Download Page 227

Page: 227 / 375

CONTENTS

FUNCTION MAP

GEQ/PEQ/Automixer



Automixer

227

RIVAGE PM10 Operation Manual

Press the RACK MOUNT popup button.

NOTE

You can mount Automixer only to GEQ1.

The GEQ MOUNT popup window appears.

NOTE

The GEQ MOUNT popup window is displayed on only one of the bays.

This screen contains the following items.

BLANK button

Unmounts the GEQ/PEQ/Automixer from the rack.

GEQ/PEQ/Automixer select buttons

Select the GEQ/PEQ/Automixer that will be mounted in the rack.

GEQ/PEQ DSP USAGE indication

Shows the state of GEQ/PEQ resource usage.

In the GEQ MOUNT popup window, use the GEQ/PEQ/Automixer select buttons
to select the item you want to mount, and then press the OK button.

The GEQ RACK screen will appear.

INPUT popup buttons

Press these buttons to access the INPUT PATCH popup window, in which you can select
a signal to patch to the channel.

OUTPUT popup buttons

Press these buttons to access the OUTPUT PATCH popup window, in which you can select
a signal to patch to the channel.

Press the INPUT popup button.

In the INPUT PATCH popup window, select the input source and then press the x
button to close the window.

Press the OUTPUT popup button.

In the OUTPUT PATCH popup window, select the output destination and then
press the x button to close the window.

Repeat steps 5–8 to insert Automixer into the desired channels.

Summary of Contents for RIVAGE PM10
























































































































































































































































































































































































Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands

Yamaha RIVAGE PM10, Operation Manual

Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands