Yamaha RIVAGE PM10 Operation Manual Download Page 317

Page: 317 / 375

CONTENTS

FUNCTION MAP

File



Editing the files saved on the USB flash drive

317

RIVAGE PM10 Operation Manual

Creating a directory

If necessary, press the directory icon and change the directory.

To move to the next higher level, press the arrow button in the PATH field.

Press the MAKE DIR button.

A keyboard window will appear, allowing you to enter a directory name.

Enter the name of the directory you want to create, then press the MAKE
button.

NOTE

You cannot create a directory using a directory name that already exists.

Summary of Contents for RIVAGE PM10
























































































































































































































































































































































































Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands

Yamaha RIVAGE PM10, Operation Manual

Search results

Summary of Contents for RIVAGE PM10

Reviews:

Related manuals for RIVAGE PM10

Brands by name

Popular brands