Plug-ins
Controlling the parameters of a plug-in
257
RIVAGE PM10 Operation Manual
1
INPUT ADJUST knob
Adjusts the input gain. However, the output gain changes inversely in tandem with the level of
this knob so that the volume remains the same as the pass-through volume (the volume
obtained when COMP IN and LIMIT IN are off). For example if INPUT ADJUST is +5 dB, the
input gain is +5 dB and the output gain is –5 dB.
[How INPUT ADJUST works]
2
LINK switch (for Stereo mount)
Turns the stereo link on/off
3
COMP IN switch
Turns the compressor on/off.
4
COMP THRESHOLD knob
Adjusts the threshold of the compressor. Note that the value changes in tandem with the
INPUT ADJUST setting.
5
COMP RECOVERY knob
Adjusts the release time of the compressor. For a1 (auto 1) and a2 (auto 2), the release time
changes automatically.
a1:
automatically changes in the range of 100 ms to 2sec.
a2:
automatically changes in the range of 50 ms to 5 sec.
6
COMP GAIN knob
Adjusts the makeup gain of the compressor. This applies before the limiter stage.
7
COMP RATIO knob
Specifies the compressor ratio.
8
METER SELECT switch (for Stereo mount)
Selects the signal source of the meter. You can select from IN (input level) /GR (gain
reduction) / OUT (output level). If you change this selection, the meter design also changes to
VU, GR, or VU respectively.
9
VU SELECT switch (for Dual mount)
Selects the signal source for the VU meter. You can select either the input level or output level.
)
LIMIT IN switch
Turns the limiter on/off.
!
LIMIT ATTACK switch
Specifies the attack time of the limiter.
FAST:
2 ms
SLOW:
4 ms
@
LIMIT THRESHOLD knob
Adjusts the threshold of the limiter. Note that the value changes in tandem with the INPUT
ADJUST setting.
#
LIMIT RECOVERY knob
Selects the release time of the limiter. For a1(auto 1) and a2 (auto 2), the release time changes
automatically.
a1:
automatically changes in the range of 100 ms to 2sec.
a2:
automatically changes in the range of 50 ms to 5 sec.
Buss Comp 369
COMPRESSOR/LIMITTER SECTION
INPUT ADJUST
INPUT GAIN
OUTPUT GAIN
I
N
PUT
CIRCUIT
OUTPUT
CIRCUIT
COMP THRESHOLD
LIMIT THRESHOLD
IN
COMPRESSOR
OUT
LIMITTER
IN
OUT
dBFS
.
dBFS
.
Inversely change in tandem
Practically, since the threshold changes, the indicated value will change in
tandem. However, the internal status of the COMPRESSOR/LIMITER section
will not change.
