Setup Procedure and Basic Operation of the RIVAGE PM10 Editor
On-screen operation
364
RIVAGE PM10 Operation Manual
Synchronizing the edited mixing data
1.
Start PM10 Editor.
The following screen appears at start-up.
2.
Click the Connect button.
Once the DSP engine detects PM10 Editor on-line, the DEVICE SYNC screen appears.
3.
Select “EDITOR
DSP.”
4.
Press the SYNC button.
Parameter settings in PM10 Editor will be copied to the RIVAGE PM10 system. Once data
synchronization is completed, the line indicating synchronization will be displayed in green.
NOTE
• If the DSP engine is connected on-line with the control surface, the EDITOR
DSP
synchronization is disabled.
• Edited mixing data can be saved to a USB flash drive, and loaded directly to the control
surface.
On-screen operation
Using the mouse wheel
You can use the mouse wheel as if you were operating the [TOUCH AND TURN] knob on the unit.
Using the PC keyboard
You can use the PC keyboard to enter text as if you were operating the keyboard screen on the unit.
Menu bar
■
File menu
This is a menu for file operations.
Exit
Exits PM10 Editor.
