CH Parameter
SENDS TO/SENDS FROM
198
RIVAGE PM10 Operation Manual
■
Using the copy function in the HPF/EQ popup window or the
DYNAMICS1/2 popup window
The following table lists the controllers and corresponding parameters.
1.
In the HPF/EQ popup window, while pressing and holding down the [SHIFT] key,
press the dynamics processor type select button to display the PARAMETER SET
popup window.
The window contains the following items.
1
Copy source
Indicates the type to copy. Select the type as needed.
2
Copy destination select knob
Selects the channel number as the copy destination.
3
SELECT ALL button
Selects all channels as the copy destination.
4
REVERT button
Cancels the SELECT ALL button setting.
5
EXECUTE button
Copies the selected parameter and closes the window.
6
CANCEL button
Aborts the copy operation and closes the window.
2.
Select the copy destination, and then press the EXECUTE button.
The parameter is copied to the selected channel number. To abort the copy operation, press the
CANCEL button instead of the EXECUTE button.
Screen
Controller
Parameter to copy
HPF/EQ popup window
EQ type select button
EQ Type
DYNAMICS 1/2 popup window
Dynamics processor type
select button
Dynamics processor type
INSERT/D.OUT popup window
(12CH/D.OUT)
FOLLOW setting buttons
To follow the FADER/ON/
DCA settings.
1
3
4
6
5
2
