Output Channels
Mixing Engine section
25
RIVAGE PM10 Operation Manual
6
MIX TO STEREO/MIX TO MATRIX
Signals can be sent from MIX buses 1 – 72 to the STEREO bus or MATRIX buses 1 – 36.
• Send Point (MIX TO STEREO)
You can select the send source point for each channel from the following options.
PRE FILTER
PRE EQ
PRE DYN
PRE DELAY
PRE FADER
POST FADER
• Send Point (MIX TO MATRIX)
You can flexibly select the send source point for each channel.
You can set the send point selected here to PRE or POST using the PRE button. You can select
each send point on the BUS SETUP screen.
Pair setting
You can pair adjacent odd/even MIX buses (in that order), and use them as a stereo module. If two
channels are paired, all of their parameters except for delay are linked.
BUS TYPE
MIX buses can be either the FIXED type whose send level is fixed or the VARI type whose send level
is variable; you can switch each odd/even-numbered pair to either type.
Library
The “OUTPUT CHANNEL LIBRARY” lets you store and recall various output channel parameters.
PRE
POST
PRE FILTER
POST FADER
PRE EQ
POST ON
PRE DYN
PRE DELAY
PRE FADER
MIX TO STEREO/
MIX TO MATRIX
MIX TO MATRIX
ON
LEVEL
BUS TYPE: VARI
KEY IN
LCR
PAN/BAL
TO ST
TO MATRIX
(ST)
TO MATRIX
(MONO)
PAN/BAL
MIX TO STEREO
ON
LEVEL
ON
BALANCE
HPF
LPF
8 BAND
PEQ
DELAY
Max.1000ms
LEVEL/
DCA1-24
To
OUTPUT
PATCH
DIMMER
TALKBACK
DYNAMICS
POST
ON
PRE
FILTER
PRE
EQ
PRE
DYN
PRE
DELAY
POST
FADER
PRE
FADER
PRE FADER
PRE FILTER
PRE EQ
PRE DYN
POST FADER
PRE DELAY
PRE FADER
PRE FILTER
PRE EQ
PRE DYN
POST FADER
POST ON
PRE DELAY
PAN LINK
6
MIX1-72
