Part Names & Functions
Top panel of the control surface
66
RIVAGE PM10 Operation Manual
9
[DCA] key
Enables you to select a DCA layer.
)
CUSTOM [1]/[2] keys
Enable you to select a custom layer. You can assign custom faders of two banks (total of 12
layers) to each custom layer.
!
Layer display
Indicates the selected layer.
@
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer.
#
[HOME] key
Recalls a group of settings. Press and hold down this key to store the following settings:
• Current screen
• Selected channel/parameter on the screen
• Selected layer
1
PIN indicator
Lights when the Pinning function for the
[TOUCH AND TURN] knob is ON.
(This feature will be supported by a future
update.)
2
[TOUCH AND TURN] knob
Controls the parameter of the knob you are
touching on the touch screen.
3
Channel strip encoder display
Indicates the function that has been assigned
to the channel strip encoder.
4
UP [
U
]/DOWN [
D
] keys
Enable you to select the function that you want
to control using the channel strip encoder.
5
[SHIFT] key
Combine with another key to perform a
certain function.
The following table shows examples of using
the [SHIFT] key combined with another key.
6
[SENDS ON FADER] key
Turns SENDS ON FADER mode on and off.
7
INPUT [1-72]/[73-144] keys
Enable you to select an input layer.
8
OUTPUT [MIX]/[MATRIX] keys
Enable you to select an output layer.
1
3
5
6
7
8
9
)
!
#
2
@
4
Procedure
Function
Press and hold down
the [SHIFT] key and
[CUE] key.
To switch cues as the
channel’s send
destination.
(A
➝
B
➝
A&B
➝
A)
