User Setup
USER DEFINED KEYS
334
RIVAGE PM10 Operation Manual
* This function cannot be assigned to USER DEFINED keys in PM10 Editor.
■
Using the Alternate function
If you assign the Alternate function (ALTERNATE FUNCTION) to a USER DEFINED key, turning
on and off that key will toggle between parameter settings that are usually controlled via channel
strip encoders (such as between ANALOG GAIN and DIGITAL GAIN).
Alternate mode is engaged when you turn on the USER DEFINED key to which the Alternate
function has been assigned.
You can select LATCH or UNLATCH for the Alternate function.
•
UNLATCH
....................Alternate mode is engaged only when you press and hold down the
USER DEFINED key.
•
LATCH
...........................Pressing the USER DEFINED key repeatedly will switch Alternate
mode on and off. In this way, you do not need to press and hold
down the USER DEFINED key to use the function.
SET BY SEL
SET [+48V]
Hold down this key and press the
[SEL] key to switch it on/off.
During this time, the [SEL] LED will
be lit if on, or dark if off.
SET [PHASE]
SET [INSERT1 ON]
SET [INSERT2 ON]
SET [DIRECT OUT ON]
SET [PRE SEND]
SET [TO STEREO A]
SET [TO STEREO B]
SET [TO LCR]
SET [GAIN COMPENSATION ON]
SET DEFAULT VALUE
While holding down this key, press a
knob of the Selected Channel to
reset it to the default value.
SET NOMINAL VALUE
While holding down this key, press a
[SEL] key to set the fader of that
channel to nominal level.
Press a parameter knob that is set to
nominal to set the corresponding
parameter to nominal.
TALKBACK
ON
LATCH
CURRENT
GROUP,
GROUP 1–8
Switches TALKBACK on/off.
UNLATCH
CURRENT
GROUP,
GROUP 1–8
Turns TALKBACK on while this key is
pressed.
TALK GROUP
1–8
Press this key to select the specified
group. While holding down this key,
press an output channel [SEL] key to
switch the assignment on/off.
TAP TEMPO
TEMPO 1–4
Sets the tap tempo.
Function
PARAMETER 1
PARAMETER 2 PARAMETER 3
Description
