Monitor
PHONES
158
RIVAGE PM10 Operation Manual
PHONES
This section explains how to set parameters related to monitoring using headphones.
The following diagram shows the PHONES signal flow.
• PHONES POINT (headphone send point)
Monitor signals are typically output from this point. However, if Cue is on, the cue signal
will be output.
• CENTER CHANNEL
If you plan not to monitor the center channel, turn this button off.
• INSERT (plug-in insert)
You can insert plug-ins into the PHONE signal.
• PHONES LEVEL (headphone volume level)
Adjusts the output level at the PHONES output jack.
• PHONES LEVEL LINK (Headphone Level Link function)
You can adjust the level of the signal sent to the PHONE output jack using the MONITOR
LEVEL knob.
Using PHONES
1.
Press the MONITOR button on the menu bar to access the MONITOR screen.
1
PHONES popup display buttons
Indicate the PHONES POINT assigned to PHONES A and PHONES B respectively. Press
these buttons to access the PHONES popup window, in which you can make detailed
PHONES settings.
CUE
MONI
MONI
CUE
MONI
C
R
L
CUE / SOLO
LEVEL
PHONES
LEVEL LINK
PHONES POINT
(MONITOR )
PHONES POINT
(CUE )
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PHO NES
INSERT
LR+C DOWNMIX
0dB
- 3dB
CENTER CHANNEL ON
- 3dB
0dB
from PLUG - INS
from GEQ / PEQ
to PLUG - INS
to GEQ / PEQ
(INSERT IN )
(INSERT OUT )
1
