MIDI/GPI
Using FADER START
346
RIVAGE PM10 Operation Manual
You can assign the following functions.
7.
In each field, select the desired function or parameter.
8.
When you finish making settings, press the OK button.
9.
Repeat steps 5 through 8 to specify functions and parameters for other ports.
Using FADER START
Make FADER START settings if you want a device connected to a GPI OUT port to operate in
tandem with fader operations.
1.
Connect an external device to the GPI connector on the control surface.
2.
Press the SETUP button on the menu bar to access the SETUP screen.
3.
Press the MIDI/GPI button to open the MIDI/GPI popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
4.
Press the FADER START tab to access the FADER START page.
Function
PARAMETER 1
PARAMETER 2
Description
NO ASSIGN
---
----
No assignment
CUE ACTIVE
CUE ON
A
Turns on the [CUE] key of
the selected channel for
CUE A/CUE B.
B
DCA ONLY
A
Turns on the [CUE] key of
the DCA for CUE A/CUE B.
B
INPUT ONLY
A
Turns on the [CUE] key of
the input channel for CUE
A/CUE B.
B
OUTPUT ONLY
A
Turns on the [CUE] key of
the output channel for CUE
A/CUE B.
B
GPI IN ACTIVE
IND.
SPECIFIC PORT
PORT 1 – PORT 8
The function assigned to
GPI IN port 1–8 becomes
active.
USER DEF.
KEY ACTIVE
IND.
SPECIFIC
NUMBER
USER DEFINED
KEY 1 – USER
DEFINED KEY 12
The function assigned to
the USER DEFINED key
becomes active
1
2
8
4
5
6
7
3
