User Setup
USER DEFINED KEYS
331
RIVAGE PM10 Operation Manual
■
Functions that can be assigned to USER DEFINED keys
NOTE
Available options in the GPI SETUP popup window (
) are the same as for GPI IN. However,
the ability to assign functions to GPI is unavailable in PM10 Editor.
Function
PARAMETER 1
PARAMETER 2 PARAMETER 3
Description
NO ASSIGN
—
—
—
No assignment
ALTERNATE
FUNCTION
LATCH
Each press of the key toggles
Alternate function on/off.
UNLATCH
Pressing and holding down the key
switches to Alternate function.
AUTOMIXER
group A,B,C,D,E OVERRIDE ON
Switches the corresponding group’s
OVERRIDE on/off.
group A,B,C,D,E PRESET ON
Switches the corresponding group’s
PRESET on/off.
BRIGHTNESS
BANK SELECT
A
Selects the bank subject to the
BRIGHTNESS setting.
B
C
D
CH ON
SPECIFIC CH
CH
1–144
Switches the channel on/off.
MIX
1–72
MATRIX
1–36
STEREO
A, B
DCA
1–24
CH SELECT
INC
Selects the next channel to operate
in the Selected Channel section.
DEC
Selects the previous channel to
operate in the Selected Channel
section.
SPECIFIC CH
CH
1–144
Selects the channel specified in the
list to operate in the Selected
Channel section.
MIX
1-72
MATRIX
1–36
STEREO A
L, R
STEREO B
L, R
CONSOLE
SHUTDOWN
Shuts down the control surface.
NOTE
You can shut down the control
surface by pressing and holding
down a USER DEFINED key to which
the Console Shutdown function has
been assigned.
CUE
OUTPUT
A
Switches CUE A on/off.
B
Switches CUE B on/off.
CLEAR CUE
CUE A
Clears CUE A.
CUE B
Clears CUE B.
CUE A+B
Clears CUE A+B.
SPECIFIC CH
CH
1–144
Switches Cue Out on/off.
MIX
1–72
MATRIX
1–36
STEREO
A, B
DCA
1–24
CUE MODE
A, B
Switches Cue mode.
CUE INTERRUPTION
A, B
Switches Cue Interruption function
on/off.
INPUT CUE POINT
A, B
Switches the input channel’s cue
point.
DCA CUE POINT
A, B
Switches the DCA’s cue point.
OUTPUT CUE POINT
A, B
Switches the output channel’s cue
point.
EVENT LIST
NEXT
Directly recalls the event associated
with the next event number.
PREV
Directly recalls the event associated
with the previous event number.
ENABLE
Enables or disables an event list.
FADER BANK
SNAPSHOT
BAY L, BAY R, BAY C, BAY ALL
Bookmarks the current fader layer
and positions on each bay. (Press
and hold down the key for two or
more seconds.)
Alternatively, reverts to the fader
layer or positions that were
bookmarked most recently. (Press
the key and release it within two
seconds.)
GAIN KNOB
FUNCTION
LATCH
BAY L, BAY R, BAY C
Enables you to select analog gain or
digital gain for each bay that will be
displayed on the OVERVIEW screen.
UNLATCH
BAY L, BAY R, BAY C
Enables you to select gain for each
bay that will be displayed on the
OVERVIEW screen. Press this key to
display analog gain, and release the
key to display digital gain.
GEQ FREQ
BANK
INC
BAY L, BAY R, BAY C
Selects the group of bands (in the
GEQ EDIT screen) that will be
controlled by the faders in the
Channel Strip section.
DEC
BAY L, BAY R, BAY C
Function
PARAMETER 1
PARAMETER 2 PARAMETER 3
Description
