manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 97 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 97

Operator Controls

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

3–39

Top Menu Organization

The Top Menu Select key cycles through the top level menu
page selections.  The far left side top menu is the default
selection and its sub-menus are automatically displayed.

The top menu groups are divided into two pages.  The first top
menu page displays:

Mode Default

Preset

Set Up

ECG

Figure 3–23.  Mode Default Top Menu (page one)

Mode Default Menu is the current highest priority active
mode.  The five possibilities are “B”, “M”, “PWD”, “CWD”
and “CFM”.

Preset is for user programmable application and factory
exam parameter preset selections.

Set Up enables the system customization sub-menus.

ECG (option) is used to adjust the ECG waveform and ECG
synchronized scanning.

The second top menu page shows:

Archive

DICOM

Auto Seq

CINE

Figure 3–24.  Mode Default Top Menu (page two)

Archive is used with the Image Archive option for storing
images to MOD.

DICOM (option) displays sub-menus for DICOM setup.

Auto Sequence displays the user programmed
measurement sequences.

CINE is used when the image is frozen for review of the
accumulated image data.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments