manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 49 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 49

Safety Precautions

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

 2–19

Warning Label Locations

Overview

LOGIQ

 500 warning labels are provided in seven different

languages (English, Japanese, German, French, Italian,
Portuguese, Spanish, Swedish, Danish, Russian, Greek and
Turkish).

Monitor Labels

A temporary label is placed on the monitor face to warn not to
move the monitor support arm without the monitor attached.
This label is removed after installation of the monitor.

Figure 2–2.  Temporary Warning Label and Location

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments