manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 111 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 111

Exam Applic. Preset Selection

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

4–7

Exam Application Preset Selection

Introduction

Select the exam category application preset, that best
describes the desired study to be performed, from the factory
default preset selections displayed on the Soft Menu.

A typical example for OB is shown in Figure 4–2.

Newborn

Tech

Diff

Fetal

Heart

General

OB

Figure 4–2.  OB Preset Selection

Use these parameters as a starting point for the exam.

Selecting a probe

Always start out with a probe that provides optimum focal
depths and penetration for the patient size and application.

Begin the scan session using the default Acoustic Output
setting for the probe and application.

The “Change Probe and Category” preset, found on System
Parameters page 1, allows the exam category to automatically
change depending on the probe selected.

Some probes are used in more than one exam category.  If the
default for “Change Probe and Category” is set to 

Simultaneous

and the wrong exam category is automatically activated, press
ID/Name to select the correct exam category.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments