manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 39 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 39

Safety Precautions

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

 2–9

Label Icon Description (cont’d)

Label/Icon

Purpose/Meaning

Location

“ATTENTION – Consult accompanying
documents” is intended to alert the user to
refer to the operator manual or other
instructions when complete information cannot
be provided on the label.

Various

“CAUTION – Dangerous voltage” (the lightning
flash with arrowhead) is used to indicate
electric shock hazards.

Various

“Mains OFF” Indicates the power off position of
the mains power switch.

Rear of system,
adjacent to mains switch

“Mains ON” Indicates the power on position of
the mains power switch.

“ON” Indicates the power on position of the
power switch.
CAUTION: This Power Switch DOES NOT
ISOLATE Mains Supply.

Adjacent to On-Off/Standby
Switch

“Off/Standby” Indicates the power off/standby
position of the power switch.

CAUTION: This Power Switch DOES NOT
ISOLATE Mains Supply.

“Protective Earth” Indicates the protective earth
(grounding) terminal.

Internal

Table 2–2.  Label Icons (cont’d)

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments