manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 103 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 103

Operator Controls

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

3–45

VCR Controls

These controls are used in conjunction with the approved
optional video cassette recorder.

Press the External Video key to allow for the display of an
external video signal (i.e. from a VCR) on the system monitor.
Pressing Play automatically selects external video.

Press the key a second time to return to LOGIQ

t

 500 video

display.

Press this key to enable or disable the on board microphone to
allow for audio to be added to the taping of system video.

Pressing the Stop/Play key either places the VCR in the play
mode or stops the play or record mode.

Pressing the Pause/Record key either places the VCR in the
record mode or causes the VCR to pause if it is already in the
record or play mode.

NOTE:  See Keyboard on 3–37 for additional VCR controls.

↓

J

 /

"

/ 

F

.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments