Preset Program
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
14–87
Performing an Auto Sequence (USERSEQUENCE)
Select an Auto Sequence, or a user programmable mode
measurement menu selection, the system automatically
prompts the user to do the first measurement in the sequence.
After the first measurement/calculation is completed, the
system automatically prompts the user to do the second
measurement in the sequence.
This continues until all measurements are completed.
Sequence Modification
During the Auto Sequence function:
Press the top of the Elllipse rocker switch to skip a desired
measurement and advance to the next measurement in the
sequence.
Press the bottom of the Ellipse rocker switch to skip back to a
previous measurement in the sequence.
Measurements skipped will appear again at the end of the
sequence. This gives the user a second chance to make the
measurements prior to exiting the Auto Sequece function.
↓
↑
Summary of Contents for 500
Page 1: ... ...