manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 508 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 508

User Define Function

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

14–104

User Define Key Program Example (cont’d)

The first time the User Define or A/N key is pressed, Average
Activity will be set to OFF.  The second time the User Define or
A/N key is pressed, Average Activity will be set to ON.  The
third time the User Define or A/N key is pressed, Average
Activity will be set to OFF.  Each press of the User Define or
A/N key toggles the Average Activity setting.

User Define Names & Lock/Unlock

The User Define Key Names & Locks Sub-Menu in the Set
Up/System Parameters menu page 3 will allow the user to lock
a key, keeping it from being deleted or reprogrammed.  This
Sub-Menu also allows the user to name or change the name of
any user defined key.

Figure 14–28.  User Define Key Names & Locks Sub-Menu

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments