Troubleshooting
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
16–28
Operation Error Message Description
Category
Problem/
Message
Possible
Cause
Possible
Corrective Action
General
Register is filled.
Cannot register any
more because
registration function has
reached its limit.
*
Register is empty.
Cannot delete any more
because registration
function is empty.
*
Save data? ‘y’ or ‘n’.
System requires
operator reaction to save
some data.
Y to save data,
N to not save data.
Overwrite existing data?
‘y’ or ‘n’.
There is pre-existing
customized data when
saving.
Y to save changes,
N to ignore changes.
Please Select ‘y’ or ‘n’.
A key other than those
specified was pressed.
Enter Y or N.
Improper Data Selected.
The data input is not
correct.
Enter correct data.
Recording
Devices
C l
Vid
P i
Check Printer. Paper is
jammed.
Paper in the printer is
jammed.
Locate and clear the
paper jam.
Color Video Printer
Check Printer. Ribbon
Cassette error.
Something is wrong with
the ribbon cassette or its
setting.
Remove ribbon and
re-install.
Check Printer. Paper
Cassette error.
The paper cassette
setting is wrong.
Remove cassette, set
and re-install.
Check Printer, Paper
Supply empty.
The printer is out of
paper.
Add paper.
Shut the top hatch of
printer.
The top hatch of the
printer is open.
Open/shut top hatch.
Shut the bottom hatch of
printer.
The bottom hatch of the
printer is open.
Open/shut bottom hatch.
Check Printer, Paper is
incorrect.
The placing of paper is
incorrect.
Remove casette, adjust
and reinstall.
Check Printer.
There is no response
from the printer.
Turn power off and on
again.
Table 16–4. Operation Error Message Description
*
If System Error Message occurs, record the message and
contact a Service Representative. Be aware that the system
may be operating at reduced capabilities, some functions
inoperative or not operating at all.
Summary of Contents for 500
Page 1: ... ...