manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 202 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 202

Zooming an Image

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

6–4

Zooming an M-Mode Image

If the Zoom key is pressed while in B/M-Mode, only the
M-Mode image will be zoomed.

Press Zoom to display a magnified M-Mode image and a
M-Mode zoom marker in the B-Mode image.

Adjust the Zoom Size control to the desired magnification
factor.  The six steps are the same as B-Mode.

Use the up/down movement of the Trackball to move the Zoom
Markers vertically along the M-Mode cursor.

Use the side to side movement of the Trackball to move the
M cursor and Zoom cursor throughout the image.

Press Clear or Zoom to cancel the zoom function.

NOTE:  Display Zoom does not function on a frozen B- and
M-Mode Timeline Image.

Zoom

Clear

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments