Troubleshooting
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
16–24
To Load Trouble Images from MOD
Trouble images can be loaded from the MOD to the hard drive.
To load trouble images from the MOD:
From the Set Up/Utility menu select
“03 Trouble Image
Save/Load/Display”
. Enter menu number 03 and press
Return.
From the Trouble Image Save/Load/Display menu select
“2: Load”. Enter menu number 2 and press Return.
A message will be displayed to place a MOD disk in the
drive and press any key to continue.
The system will read all trouble images from the MOD and
display the image menu in 2 pages of 4 files each. The line
available under the file number, date/time and mode
information is the 42 character comment line.
Trouble image files must be loaded one at a time.
Enter the number of the file to be loaded (i.e. “01”)
and press Return.
The message
“Loading now”
is displayed.
The system will take a few moments to load the image file.
After the load operation is complete, the message
“Press ‘Y’
to continue, or ‘Ctrl+R’ to return.”
is displayed. Pressing ‘Y’
will prompt for another file menu number to be loaded.
Pressing Ctrl+R will return to the previous menu screen.
To Display Trouble Images
Trouble images can only be displayed from the files stored on
the hard drive.
From the Set Up/Utility menu select
“03 Trouble Image
Save/Load/Display”
. Enter menu number 03 and press
Return.
From the Trouble Image Save/Load/Display menu select
“3: Display”. Enter menu number 3 and press Return.
A menu of the trouble Image files on the hard drive is displayed
in 2 pages of 4 files each if necessary.
Summary of Contents for 500
Page 1: ... ...