manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 409 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 409

Time Adjustment

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

14–5

Time Adjustment (cont’d)

S

Enter menu number “1” or “01” (Time Adjustment) in the
Utility Menu and press Return.  The Time Adjustment Menu
appears as shown in Figure 14–2.

Figure 14–2.  Time Adjustment Menu

NOTE:  Time is changed by adjusting the current time a
maximum of plus or minus 12 hours.

S

To Advance (add) the time, type in the number of hours and
minutes to add to the currently displayed time.  HH:MM is
the format to use.

S

To Retard (subtract) the time, type a minus sign (–) then the
hours and minutes to be subtracted from the currently
displayed time. –HH:MM is the format to use.

S

Press Return.  This completes the time adjustment and the
Utility Menu reappears with the new time displayed.

S

Press the Utility rocker switch to return to the previous scan
mode.

The 12 hour display format has no am/pm indicator.  The date
will change at noon if the set time is 12 hours off.

.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments