Preparing for a Biopsy
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
15–51
Preparation (cont’d)
Install the sheath:
1.
Remove the sheath from its package. Do not unroll the
sheath.
NOTE: Remember to rinse all sanitary probe sheaths of
powder before placing on the probe. Powder can
degrade the displayed image.
2.
Place an adequate amount of ultrasound gel inside the
sheath tip (the gel is between the sheath inner surface
and the probe aperture).
NOTE: Ensure that only acoustic coupling gel is used for this
purpose.
3.
Place the sheath tip over the probe aperture and then
pull the sheath end toward the probe handle.
4.
Inspect the sheath for nicks, cuts or tears.
1
Probe Handle
2
Probe Body
3
Sanitary Sheath
Figure 15–33. Probe with Sheath
Summary of Contents for 500
Page 1: ... ...