manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 340 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 340

Additional Cardiac Calculations

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

10–28

Trace Auto

To turn Doppler Auto Trace on or off:

MVA

Mean PG

LV

Report

PHT

ET

Max PG

TRACE

AUTO

Figure 10–32.  Cardiac Calculation Sub-Menu

Select TRACE AUTO from the Calculation Sub-Menu.

Use the Trace Auto Sub-Menu selection to turn on/off the
Doppler Auto Trace function.

If Trace Auto is highlighted, the Doppler envelope will
automatically be traced as determined by parameters set in
Custom Display page 14 and Preset Program page 7.

If Trace Auto is not highlighted, the Auto Trace function is off
and traces can be performed manually.

Trace Method

The system will trace the peak value, floor and peak, mean and
peak or mode and peak, depending on the method selected by
the user.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments